Made to measure from just $995 per set
Sectional Sliding Doors
As the name suggests, Sectional sliding doors are manufactured in sections and combined into one very strong door. Sectional allows you to combine various panels including mirror, melamine and mdf. Our Sectional doors will fit openings up to 3000mm High, very suitable for homes with higher ceiling height. Quad top wheels ensure that the Sectional Sliding Doors achieve their smooth action, whilst the internal bottom wheels complete the quality of this door series. Quiet, smooth and stylish designs.
Sectional Series Sliding doors are available in Double, Triple and Quad combinations and the Maximum opening size of 5m wide x 3m high.
Double Doors any size up to 2400mm Wide x 2700mm High From $995.00
Double Doors any size up to 2400mm Wide x 3000mm High From $1150.00
Triple Doors any size up to 3600mm Wide x 2700mm High From $1495.00
Triple Doors any size up to 3600mm Wide x 3000mm High From $1725.00
- Panel choices that include Mirror, Melamine, and MDF panels
- 100% Quality Aluminium frames and tracks available in Brushed Aluminium and Glossy White
- Super Glide Quad Top Wheels and Double Internal Bottom Wheels
- Suitable for door openings of up to 3m high
When you order our Sectional Sliding Doors we will manufacture the doors to suit your particular size requirements, for no extra charge.
Unlike some door manufacturers, our door tracks and frames will not rust!
Please note; for sliding wardrobe doors to work effectively the Sides of the door opening must be Plumb and the Floor level.
Please note; for doors to work effectively the Sides of the door opening must be Plumb and the Floor level. The measurements of the left and right sides should not vary by more than 5mm and the measurements between the bottom and top should not vary by more than three mm.
We do not recommend putting Bottom tracks on top of carpet.
Regency Wardrobes will take no responsibility for doors where they are required to fit in an opening outside of these guidelines.
When ordering please ensure the measurements you provide are correct.